They will return to 0% if the temperature is 65 C or less. For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C. (I have the same problem with Dragon Center and OpenHardwareMonitor ). When on AMD Master the CPU temp is at 35-36☌, fan control is showing 46-47☌. When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger. One question from my side, I have an offset on the CPU temperature between Fancontrol and AMD Ryzen Master. Next, you need to set a minimum speed and a maximum speed. Basically, you're telling the app, "I want my temperature to never exceed X, but it's okay if it never goes below Y." Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. The main thing you have to know about FanControl is that it uses the following three libraries: LibreHardwareMonitor, MaterialDesignInXamlToolkit, and NvAPIWrapper. I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |